|
September 25, 2006
ShockWatch, a subsidiary of Media Recovery Inc., certifies that to our
knowledge all of the Shockwatch label products, outlined in the table
below, are compliant with the European Union Directive 2002/95/EC for
the Restriction of use of certain Hazardous Substances in Electrical
and Electronic Equipment (RoHS).
|
| Part #: | | Product Description |
| | | L20 ShockWatch label |
| | L25 ShockWatch label |
| 20200 | | L30 ShockWatch label |
| 20300 | | L35ShockWatch label |
| 20500 | | L47 ShockWatch label |
| 20686 | | L55 ShockWatch label |
| 20700 | | L65 ShockWatch label |
| 20001 | | L75 ShockWatch label |
| 20500 | | L85 ShockWatch label |
| 20XXX-Custom | | All ShockWatch custom logo labels |
|
|
This status is based on ShockWatch's understanding of RoHS, ShockWatch's knowledge of the materials that go into its products and Laboratory analysis of its products as of the date of disclosure of material content information. No lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromiun (Cr+6), PBB or PBDE is intentionally added to these devices by Media Recovery Inc or its affiliates. Any trace impurities of these substances contained within the parts are below the RoHS specified threshold levels outlined in maximum concentration values (MCV's) per RoHS amendment Commission Decision 2005/618/EC dated August 18th 2005. (CR+6, Hg, Pb, PBB's, PBDE's, <1000ppm - Cd <100ppm). Maximum limit does not apply to applications covered by RoHS exemptions.
Important Information and Disclaimer: Information provided by ShockWatch or Media Recovery Inc. on its website or in other communications concerning the substance content of its products represents ShockWatch's knowledge and belief as of the date that it is provided. ShockWatch bases its knowledge and belief on information provided by third parties and laboratory test results and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ShockWatch has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. In no event shall ShockWatch's liability arising out of such information exceed the total purchase price of ShockWatch part(s) at issue sold by ShockWatch to Customer on an annual basis.
|
|
|
MAG 2000 and MAG 2000 Impact Date/Timer Specifications
| Operating Temperature |
-13°F/-25°C to +140°F/+60°C |
| Temperature Durability Range |
-40°F/-40°C to +151°F/+66°C |
| Size |
2.5" x 2.4"
2.8" x 3.0" with mounting bracket |
| Thickness |
0.9" (MAG 2000)
1.2" (MAG 2000 Impact Date/Timer) |
| Humidity |
0 to 99% non-condensing |
| Case Material |
High-impact ABS & acrylic |
| Shock Resistance |
200G @ 11 ms |
| Shock Range |
1/2 to 25G in 1/2G increments |
| Frequency |
0 to 20 Hz flat |
| Security |
Tamper-resistant, resettable utilizing key |
| Chemical Resistance |
Neoprene O-ring seal is weatherproof and chemically resistant to solvents, acids, and petrochemicals |
|
|
Contact Us
For additional information or questions about any of our damage prevention products, please contact us.
|
|
|